7 - 54
ENGINE
8. Install the two condenser retainer bolts (1) into the
radiator support. Tighten the bolts to 10 N·m (89 in.
lbs.).
9. Install the radiator fan. (Refer to 7 - COOLING/EN-
GINE/RADIATOR FAN - INSTALLATION).
10. Install the air inlet tubes.
11. Refill the cooling system. (Refer to 7 - COOLING/
ENGINE/COOLANT - STANDARD PROCEDURE).
12. Connect the negative battery cable.
13. Start the engine and check for coolant leaks.
14. Recheck the coolant level.
ZH