Table of Contents
Advertisement
ZH
Using a suitable tool, grasp the radiator hold down
clamps (2) and pull up to remove the clamps from the
mounting holes.
10. Remove the condenser retaining bolts (1) from
the radiator support.
11. Carefully lean the radiator back toward the engine.
12. Gently lift and remove the radiator from the
vehicle.
CLEANING
External cleaning of the radiator fins can be accomplished by applying cold water and compressed air to the back
(engine side) of the radiator. This method will help to flush the radiator of any trapped debris.
INSPECTION
The radiator cooling fins should be checked for damage or deterioration. Inspect cooling fins to make sure they are
not bent or crushed, these areas result in reduced heat exchange causing the cooling system to operate at higher
temperatures. Inspect the plastic end tanks for cracks, damage, or leaks.
ENGINE 7 - 51
Advertisement
Chapters
Table of Contents
