Chrysler 2005 Crossfire SRT6 Service Manual page 584

7 - 40 ENGINE
5. Pull up on the engine coolant temperature sensor
retaining clip (1) and slide the engine coolant tem-
perature sensor out of the housing.
6. Remove the engine coolant temperature sensor
from the engine.
REMOVAL - SRT
1. Disconnect the negative battery cable.
2. Partially drain the cooling system. (Refer to 7 -
COOLING/ENGINE/COOLANT - STANDARD PRO-
CEDURE).
3. Remove the engine cover. Grasp both corners of
the engine cover and pull up firmly.(Refer to 9 -
ENGINE - REMOVAL).
ZH