Rep 7.31 Upper Option Harness - Xerox Phaser 4600 Service Manual

Figure 1 Remove the Size Switch
Revised
Phaser 4600/4620/4622 Printer Service Manual

REP 7.31 Upper Option Harness

Parts List on PL 8.30 Item 10
Removal
Use safe handling procedures when removing the module. Refer to
is heavy.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the option feeder from the printer
2. Remove the Tray.
3. Remove the Right Cover, REP
4. Disconnect CN6 from the Feeder Board,
Figure 1 Disconnect the Upper Feeder Harness
5. Remove 2 screws that secure the upper harness bracket to the chassis.
6. Remove the harness from the chassis,
04/2016
4-45
WARNING
GP
WARNING
GP 15.
7.25.
Figure 1.
Figure 2.
4 Repairs and Adjustments
REP 7.30, REP 7.31
15. The module