Show Ip Igmp Groups - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

IGMP S C
NOOPING OMMANDS

SHOW IP IGMP GROUPS

show ip igmp groups
Overview Use this command to display the multicast groups with receivers directly
connected to the router, and learned through IGMP.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip igmp groups [<ip-address>|<interface> detail]
Mode User Exec and Privileged Exec
Example The following command displays local-membership information for all ports in all
interfaces:
awplus#
Output Figure 22-2: Example output from the show ip igmp groups command
Table 1: Parameters in the output of the show ip igmp groups command
613-50157-01 Rev C
Parameter Description
<ip-address>
Address of the multicast group, entered in the form A.B.C.D.
<interface>
Interface name for which to display local information.
show ip igmp groups
IGMP Connected Group Membership 
Group Address Interface
224.0.1.1 port1.0.1
224.0.1.24 port1.0.2
224.0.1.40 port1.0.3
224.0.1.60 port1.0.3
224.100.100.100 port1.0.1
228.5.16.8 port1.0.3
228.81.16.8 port1.0.6
228.249.13.8 port1.0.3
235.80.68.83 port1.0.5
239.255.255.250 port1.0.3
239.255.255.254 port1.0.4
Parameter Description
Group
Address of the multicast group.
Address
Interface
Port through which the group is reachable.
Uptime
The time in weeks, days, hours, minutes, and seconds that this
multicast group has been known to the device.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Guide.
Uptime Expires
00:00:09 00:04:17
00:00:06 00:04:14
00:00:09 00:04:15
00:00:05 00:04:15
00:00:11 00:04:13
00:00:11 00:04:16
00:00:05 00:04:15
00:00:08 00:04:17
00:00:12 00:04:15
00:00:12 00:04:15
00:00:08 00:04:13
"Getting Started
Last Reporter 
10.10.0.82 
10.10.0.84 
10.10.0.91 
10.10.0.7 
10.10.0.91 
10.10.0.91 
10.10.0.91 
10.10.0.91 
10.10.0.40 
10.10.0.228 
10.10.0.84
723