Using The Show Diffserv Command - Dell Force10 S2410-01-10GE-24P Configuration Manual

Figure 12-143. show class-map Command Example
Force10 #show class-map
------------------------------- ----- -------------------------------
cl-map-1
cl-map-2
cm-3
Force10 #
If
classname
fields are displayed:
Class Name—The name of this class. (Note that the order in which classes are displayed is not necessarily the
same order in which they were created.)
Class Type—(as above)
ACL Number—The ACL number used to define the class match conditions at the time the class was created.
This field is only meaningful if the class type is acl.
Note: The contents of the ACL may have changed since this class was created.
Ref Class Name—The name of an existing DiffServ class whose match conditions are being referenced by the
specified class definition.

Using the show diffserv Command

Command Syntax
show diffserv
[service [brief]]
The following fields are displayed:
DiffServ Admin mode—The current value of the DiffServ administrative mode.
Class Table Size—The current number of entries (rows) in the Class Table.
Class Table Max—The maximum allowed entries (rows) for the Class Table.
Class Rule Table Size—The current number of entries (rows) in the Class Rule Table.
Class Rule Table Max—The maximum allowed entries (rows) for the Class Rule Table.
Policy Table Size—The current number of entries (rows) in the Policy Table.
Policy Table Max—The maximum allowed entries (rows) for the Policy Table.
Policy Instance Table Size—The current number of entries (rows) in the Policy Instance Table.
Policy Instance Table Max—The maximum allowed entries (rows) for the Policy Instance Table.
186 | Quality of Service
Class
Class Name Type
All
All
All
is not specified, this command displays a list of all defined DiffServ classes. The following
Command Mode Usage
Privileged Exec This command displays the DiffServ General Status Group information,
which includes the current administrative mode setting as well as the
current and maximum number of rows in each of the main DiffServ private
MIB tables. This command takes no options.
Reference Class Name
cl-map-2