Security > Server Groups > Tacacs - Dell PowerConnect W-AirWave 7.6 Configuration Manual

Field
Use MD5
Enable
Source Interface
Select Add to complete the configuration of the RADIUS server, or click Save to complete the editing of an existing
server. The new server appears on the Security > Server Groups > RADIUS page. This server is now available to be
used by server groups.
Security > Server Groups > TACACS
You can configure TACACS+ servers for use by a server group. The Security > Server Groups > TACACS page
displays current TACACS servers available for inclusion in server groups. Select Add to create a new RADIUS server,
or click the pencil icon next to an existing TACACS server to edit the configuration.
The Security > Server Groups > Add New TACACS Server page contains the following fields, as described in
Table 18:
Table 18:
Security > Server Groups > TACACS
Field
General Settings
Folder
Name
Other Settings
Host IP Address
Key (Confirm Key)
TCP Port
Retransmits (0-3)
Tmeout (1-30 sec)
Enable
Session Authorization
60 | Configuration Reference
Default Description
No Enable or disable the use of MD5 hashing for cleartext passwords.
Yes Enable or disable the RADIUS server.
Enter a VLAN number ID between 1-4094.
Allows you to use source IP addresses to differentiate RADIUS requests.
Associates a VLAN interface with the RADIUS server to allow the server-specific
source interface to override the global configuration.
If you associate a Source Interface (by entering a VLAN number) with a
configured server, then the source IP address of the packet will be that
interface's IP address.
If you do not associate the Source Interface with a configured server (leave the
field blank), the IP address of the global Source Interface will be used. Requires
a minimum version of 6.1.0.0.
Default Description
Set the folder with which the server is associated. The drop-down menu displays
Top
all folders available for association with the server group.
Blank Enter the name of the server.
0.0.0.0
Set the shared secret to authenticate communication between the TACACS+ client
and server.
49 Set the TCP port to be used by the server.
3 Set the maximum number of times a request is retried.
20 Set the timeout period for TACACS+ requests, in seconds.
Yes Enable or disable the TACACS server.
Enables or disables session authoriaztion.Session authorization turns on the
No
optional authorization session for admin users.
Dell PowerConnect W-AirWave 7.6 | Configuration Guide