Gi1/0/3
Enabled
Gi1/0/4
Enabled
Gi1/0/5
Enabled
Gi1/0/6
Enabled
Gi1/0/7
Enabled
Gi1/0/8
Enabled
show green-mode eee-lpi-history interface
Use the show green-mode eee-lpi-history interface command to display the
interface green-mode EEE LPI history.
Syntax
show green-mode eee-lpi-history interface interface-id
•
interface-id—An Ethernet interface identifier. See
Conventions
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
On combo ports, samples are only collected on the copper ports when
enabled.
The following fields are displayed by this command.
Term
Sampling Interval
Total No. of
Samples to Keep
Percentage LPI
Time per Stack
Sample No.
Active
Enabled
Active
Enabled
Active
Enabled
Active
Enabled
Active
Enabled
Active
Enabled
for interface representation.
Description
Interval at which EEE LPI statistics is collected.
Maximum number of samples to keep.
Percentage of total time spent in LPI mode by all ports in the
stack when compared to total time since reset.
Sample index.
Disabled
In-Active
Disabled
In-Active
Disabled
In-Active
Disabled
In-Active
Disabled
In-Active
Disabled
In-Active
Interface Naming
Layer 2 Switching Commands
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
451