Retries (Captive Portal) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
retries
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

retries (Captive Portal)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2936
®
OS for EX Series Ethernet Switches, Release 10.4
retries number;
[edit protocols dot1x authenticator interface (all | [interface-names])]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For 802.1X authentication, configure the number of times the switch attempts to
authenticate the port after an initial failure. The port remains in a wait state during the
quiet period after the authentication attempt.
3 retries
—Number of retries.
number
Range: 1 through 10
Default: 3
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring 802.1X Interface Settings (CLI Procedure) on page 2829
Configuring 802.1X Authentication (J-Web Procedure) on page 2830
Understanding Authentication on EX Series Switches on page 2746
retries number-of-tries;
[edit services captive-portal interface (all | interface-names)] ]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure the number of times the user can attempt to submit authentication information.
number-of-tries —Number of authentication attempts by user.
Range: 1–65535
Default: 3
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
Copyright © 2010, Juniper Networks, Inc.