Server-Timeout (Captive Portal); Session-Expiry - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

server-timeout (Captive Portal)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

session-expiry

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2946
®
OS for EX Series Ethernet Switches, Release 10.4
server-timeout seconds;
[edit services captive-portal interface (all | interface-names)] ]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure the time in seconds an interface will wait for a reply when relaying a response
from the client to the authentication server before timing out and invoking the server-fail
action.
seconds —Number of seconds.
Range: 1–65535
Default: 20
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
session-expiry seconds;
[edit services captive-portal interface (all | interface-names)] ]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure the maximum duration in seconds of a session.
—Duration of session.
seconds
Range: 1 through 65535
Default: 3600
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
Copyright © 2010, Juniper Networks, Inc.