Source-Address (Ntp, Radius, System Logging, Or Tacacs+) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

source-address (NTP, RADIUS, System Logging, or TACACS+)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2948
®
OS for EX Series Ethernet Switches, Release 10.4
source-address source-address;
[edit system accounting destination radius server server-address],
[edit system accounting destination tacplus server server-address],
[edit system ntp],
[edit system radius-server server-address],
[edit system syslog],
[edit system tacplus-server server-address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify a source address for each configured TACACS+ server, RADIUS server, NTP
server, or the source address to record in system log messages that are directed to a
remote machine.
source-address —A valid IP address configured on one of the router or switch interfaces.
For system logging, the address is recorded as the message source in messages sent
to the remote machines specified in all
hierarchy level, but not for messages directed to the other
[edit system syslog]
Routing Engine or to the TX Matrix router or TX Matrix Plus router in a routing matrix
based on a TX Matrix router or TX Matrix Plus router.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring RADIUS Authentication
Synchronizing and Coordinating Time Distribution Using NTP
Specifying an Alternative Source Address for System Log Messages
statements at the
host hostname
Copyright © 2010, Juniper Networks, Inc.