Ipv6 Mpls L3Vpn Commands; Address-Family Ipv6 (Vpn Instance View); Address-Family Vpnv6 - HP FlexFabric 12500 Command Reference Manual

IPv6 MPLS L3VPN commands

This chapter describes only IPv6 MPLS L3VPN-specific commands. For information about the commands
available for both IPv4 MPLS L3VPN and IPv6 MPLS L3VPN, see

address-family ipv6 (VPN instance view)

Use address-family ipv6 to enter IPv6 VPN view.
Use undo address-family ipv6 to remove all configurations from IPv6 VPN view.
Syntax
address-family ipv6
undo address-family ipv6
Views
VPN instance view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
In IPv6 VPN view, you can configure IPv6 VPN parameters such as inbound and outbound routing
policies.
Examples
# Enter IPv6 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] address-family ipv6
[Sysname-vpn-ipv6-vpn1]
Related commands
address-family ipv4 (VPN instance view)

address-family vpnv6

Use address-family vpnv6 to create the BGP VPNv6 address family and enter its view.
Use undo address-family vpnv6 to remove the BGP VPNv6 address family and all configurations in
address family view.
Syntax
address-family vpnv6
undo address-family vpnv6
"MPLS L3VPN
102
commands."