Display Msdp Peer-Status - HP 5900 Series Command Reference Manual

Field
AS
SA count
Reset count

display msdp peer-status

Use display msdp peer-status to display detailed status of MSDP peers.
Syntax
display msdp [ vpn-instance vpn-instance-name ] peer-status [ peer-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the commands displays detailed status of the
MSDP peers on the public network.
peer-address: Specifies an MSDP peer by its address. If you do not specify an MSDP peer, the command
displays the detailed status of all MSDP peers.
Examples
# Display the detailed status of the MSDP peer 20.20.20.20 on the public network.
<Sysname> display msdp peer-status 20.20.20.20
MSDP peer 20.20.20.20; AS 100
Description:
Information about connection status:
State: Disabled
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Received/sent messages: 867/867
Discarded input messages: 0
Discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Mesh group peer joined: momo
Last disconnect reason: Hold timer expired with truncated message
Truncated packet: 5 bytes in buffer, type: 1, length: 20, without packet time: 75s
Information about (Source, Group)-based SA filtering policy:
Import policy: None
Export policy: None
Description
Number of the AS where the MSDP peer is located. If the system
could not obtain the AS number, this field displays a question mark
(?).
Number of (S, G) entries.
MSDP peering connection reset times.
165