Display Dhcp Relay Statistics - HP A5120 EI Series Command Reference Manual

Default level
1: Monitor level
Parameters
group-id: Displays the information of the specified DHCP server group numbered from 0 to 19.
all: Displays the information of all DHCP server groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dhcp relay server-group command to display the configuration information of a specified
DHCP server group or all DHCP server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No.
1
2
Table 14 Output description
Field
No.
Group IP

display dhcp relay statistics

Syntax
display dhcp relay statistics [ server-group { group-id | all } ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-id: Specifies the number (in the range 0 to 19) of a server group about which to display DHCP
packet statistics.
all: Specifies all server groups about which DHCP packet statistics is to displayed. Information for each
group is displayed independently.
Group IP
1.1.1.1
1.1.1.2
Description
Sequence number
IP address in the server group
69