Interface: Vlan-interface200
Status: Enable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Remote ID: device001
Table 5 Command output
Field
Interface
Status
Strategy
Format
Circuit ID format-type
Remote ID format-type
Node identifier
User defined
Circuit ID
Remote ID
display dhcp relay security
Syntax
display dhcp relay security [ ip-address | dynamic | static ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
Description
Interface name.
Option 82 state, which can be Enable or Disable.
Handling strategy for requesting messages containing Option 82, which can
be Drop, Keep, or Replace.
Padding format of Option 82, which can be Normal or Verbose.
Non-user-defined code type of the circuit ID sub-option, which can be ASCII or
HEX.
Non-user-defined code type of the remote ID sub-option, which can be ASCII
or HEX.
Access node identifier.
Content of user-defined sub-options.
User-defined padding content of the circuit ID sub-option.
User-defined padding content of the remote ID sub-option.
38