Arp Source-Mac Exclude-Mac; Arp Source-Mac Threshold - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
Parameters
time: Sets the aging time for ARP attack entries, in the range of 60 to 6000 seconds.
Examples
# Set the aging time for ARP attack entries to 60 seconds.
<Sysname> system-view
[Sysname] arp source-mac aging-time 60
arp source-mac exclude-mac
Use arp anti-attack source-mac exclude-mac to exclude specific MAC addresses from source MAC
address based ARP attack detection.
Use undo arp anti-attack source-mac exclude-mac to remove the specified MAC addresses.
Syntax
arp source-mac exclude-mac mac-address&<1- 1 0>
undo arp source-mac exclude-mac [ mac-address&<1- 1 0> ]
Default
No MAC address is excluded from source MAC address based ARP attack detection.
Views
System view
Predefined user roles
network-admin
Parameters
mac-address&<1- 1 0>: MAC address list. The mac-address argument indicates an excluded MAC address
in the format H-H-H. &<1- 1 0> indicates the number of excluded MAC addresses that you can configure.
Usage guidelines
If you do not specify any MAC address, the undo arp source-mac exclude-mac command removes all
excluded MAC addresses.
Examples
# Exclude a MAC address from source MAC based ARP attack detection.
<Sysname> system-view
[Sysname] arp source-mac exclude-mac 2-2-2
arp source-mac threshold
Use arp source-mac threshold to configure the threshold for source MAC address based ARP attack
detection. If the number of ARP packets sent from a MAC address within 5 seconds exceeds this threshold,
the device recognizes this as an attack.
Use undo arp source-mac threshold to restore the default.
295
Advertisement
Table of Contents
