Vlan Configuration Commands; Basic Vlan Configuration Commands; Default; Description - HP 6125G Command Reference Manual

VLAN configuration commands

Basic VLAN configuration commands

default

Syntax
default
View
VLAN interface view
Default level
2: System level
Parameters
None

Description

CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you perform it on a live network.
Use default to restore the default settings for a VLAN interface.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the display this command in interface view to check
for these commands, and perform their undo forms or follow the command reference to individually
restore their default settings. If your restoration attempt still fails, follow the error message to resolve the
problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Syntax
description text
undo description
130