Display Stp Region-Configuration - HP 6125G Command Reference Manual

display stp region-configuration

Syntax
display stp region-configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display stp region-configuration to display effective configuration information of the MST region,
including the region name, revision level, and user-configured VLAN-to-instance mappings.
Related commands: instance, region-name, revision-level, and vlan-mapping modulo.
Examples
# In MSTP mode, display effective MST region configuration information.
<Sysname> display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 29 Command output
Field
Format selector
Region name
Revision level
:0
:hello
:0
Vlans Mapped
21 to 4094
1 to 10
11 to 20
Description
Format selector defined by the spanning tree protocol. The default value is 0
and the selector cannot be configured.
MST region name.
Revision level of the MST region, which can be configured by using the
revision-level command and defaults to 0.
100