Sntp Client Poll Timer - 3Com 3CRUS2475 Command Reference Manual

156 C 10: C
HAPTER
sntp client poll
timer
C
LOCK OMMANDS
Example
The following example authenticates key 8.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
The sntp client poll timer Global Configuration mode command sets
the polling time for the Simple Network Time Protocol (SNTP) client. To
restoreTo restoreTo restore default configuration, use the no form of this
command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
Parameters
seconds — Polling interval in seconds. (Range: 60-86400)
■
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the polling time for the SNTP client to 120
seconds.
Console(config)# sntp client poll timer 120