Canon imageRUNNER ADVANCE C5500 Series Service Manual page 749

COPIER > DISPLAY > ACC-STS
SEND 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
HDD 1
Detail
Use Case
Adj/Set/Operate Method
IA-RAM 1
Detail
Use Case
Adj/Set/Operate Method
Unit
■ ANALOG
COPIER > DISPLAY > ANALOG
TEMP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Appropriate Target Value
Amount of Change per
Unit
HUM 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Appropriate Target Value
Amount of Change per
Unit
Dspl SEND support PCB installation state
To display the installation state of the PCB that supports SEND function.
If the PCB is installed, SEND function can be used.
When checking the connection between the machine and the PCB that supports SEND function
N/A (Display only)
0 to 1
0: Not installed, 1: Installed
Display of HDD model name
To display the model name of HDD.
When checking the model name of HDD used on the machine
N/A (Display only)
Display of MNCON PCB memory(IA) capacity
To display the memory (IA) capacity of the Main Controller PCB.
When checking the memory capacity of the Main Controller PCB
N/A (Display only)
MB
Display of outside temperature
To display the temperature outside the machine.
This is measured by the Environment Sensor 2 that detects the outside air.
When checking the temperature outside the machine
N/A (Display only)
0 to 50
deg C
20 - 27
1
Display of outside humidity
To display the humidity outside the machine.
This is measured by the Environment Sensor 2 that detects the outside air.
When checking the humidity outside the machine
N/A (Display only)
0 to 100
%
30 - 70
1
735
8. Service Mode