Canon imageRUNNER ADVANCE C5500 Series Service Manual page 935

COPIER > OPTION > DSPLY-SW
FXMSG-SW 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
UI-PRINT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IMGC-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
UI-RSCAN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF Fixing Ass'y replacement message
To set whether to display the message prompting to replace the Fixing Assembly on the Control
Panel when the counter for life judgment reaches the specified value.
When the setting values of FXMSG-SW and FXWRNLVL are 1, the Fixing Assembly life detection
is performed.
When the Fixing Assembly reaches its life, the Fixing Assembly replacement message "Fixing
roller needs to be replaced. (Call service representative.)" is displayed. In this case, perform the
following procedure.
1) Turn OFF the main power switch, and replace the Fixing Film Unit and Pressure Roller.
2) Turn ON the main power switch and execute CNT-DCON.
3) Turn OFF/ON the main power switch.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
COPIER> OPTION> FNC-SW> FXWRNLVL
COPIER> FUNCTION> CLEAR> CNT-DCON
Set of secured print-related UI display
To set whether to display UI related to secured print.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Hide all UIs related to secured print
1: Display all UIs related to secured print
2: Hide Secured Print button in the main menu and the simple authentication settings in Settings/
Registration menu
0
ON/OFF of img adj item display: Set/Reg
To set whether to display the item relating to image adjustment in Settings/Registration menu.
When 1 is set, detailed image adjustment procedure will be displayed only for the duplicated paper
specified with the following settings: Preferences> Paper Settings> Paper Type Management
Settings.
As needed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Preferences> Paper Settings> Set Paper Type Management
ON/OFF of remote scan screen display
To set whether to display the remote scan screen on the Control Panel.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
921
8. Service Mode