Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1141

6. Hold the Toner Container as shown in the figure and
shake it approx. 10 times.
9 to 10
7. Be sure to insert the Toner Container horizontally
with your hand supporting its bottom until approx.
half of it is inserted.
8. Close the Toner Cover. Toner Replacement Cover
and Small Cover.
Host Machine Settings
(Starting the Setup Guide)
CAUTION:
• The Setup Guide screen appears when the power
is turned ON for the first time after the machine is
installed. Follow the instructions displayed on the
Touch Panel Display to configure the settings of
the host machine.
• It is not possible to exit Setup Guide halfway
through.
• Setup Guide can be started again from [Settings/
Registration] ( [Settings/Registration] >
[Management Settings] > [License/Other] > [Start
Setup Guide]).
• What has been registered in Setup Guide can be
changed from items in (Settings/Registration).
When configuring settings using Setup Guide,
excluding some of the setting items, it is possible
to proceed to the next setting without entering the
current setting. To configure skipped settings,
configure the settings one by one after exiting
Setup Guide. If the host machine is turned OFF
during registration using Setup Guide, Setup
Guide is automatically started by turning ON the
power again. Once registration using Setup Guide
has been completed, Setup Guide is not
automatically started by turning ON the host
machine.
CAUTION:
Register the information of paper loaded during
installation of the host machine.
Be sure to register the correct paper type. Especially in
the case of special paper types such as heavy paper,
registering a wrong paper type may result in image
failure, and when the Fixing Assembly becomes soiled
or paper wraparound occurs, repair by a service
technician becomes necessary.
1127
9. Installation