10. Hold the area within 10mm from the edges of the ITB, and remove it upward.
CAUTION:
Do not touch the surface of the ITB Drive Roller [1], Secondary Transfer Inner Roller [2], and Primary Transfer Roller [3];
otherwise, it can cause an image failure.
CAUTION:
Actions after
Replacement:"Actions after Parts Replacement" on page 433
Removing the Primary Transfer Roller (Bk)
■ Preparation
1. Removing the ITB
Unit"Removing the ITB Unit" on page 283
2. Removing the ITB Cleaning
3. Removing the
ITB"Removing the ITB" on page 295
[1]
[1]
Unit"Removing the ITB Cleaning Unit" on page 290
299
10mm
10mm
[2]
[3]
4. Disassembly/Assembly