Canon imageRUNNER ADVANCE C5500 Series Service Manual page 769

COPIER > DISPLAY > MISC
TNRB-IDK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
FX-ID 2
Detail
Use Case
Adj/Set/Operate Method
■ HT-C
COPIER > DISPLAY > HT-C
TGT-A-Y 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Appropriate Target Value
TGT-A-M 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Appropriate Target Value
TGT-A-C 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Appropriate Target Value
Display of Bk-color Toner Container ID
To display the ID of Bk-color Toner Container that is installed to the machine
When checking whether the barcode ID on the Toner Container is read correctly
N/A (Display only)
12-digit decimal number
Display of Fixing Unit ID
To display the ID of the Fixing Unit that is installed to the machine.
When checking the ID of the Fixing Unit
N/A (Display only)
Multi tone scrnA Y-patch tgt VL: H-SPD
To display the Y-color patch target value of screen A in real-time multiple tone control at high speed.
Among 10-gradation patch images formed by each dithering method (error diffusion/low screen
ruling/high screen ruling), 5th patch image is the target.
When hue variation occurs and the displayed value is not in the tolerable range, execute the auto
gradation adjustment (reset the target value). Check the Patch Sensor if not corrected.
When hue variation occurs
N/A (Display only)
0 to 1023
0 - 700
Multi tone scrnA M-patch tgt VL: H-SPD
To display the M-color patch target value of screen A in real-time multiple tone control at high
speed.
Among 10-gradation patch images formed by each dithering method (error diffusion/low screen
ruling/high screen ruling), 5th patch image is the target.
When hue variation occurs and the displayed value is not in the tolerable range, execute the auto
gradation adjustment (reset the target value). Check the Patch Sensor if not corrected.
When hue variation occurs
N/A (Display only)
0 to 1023
0 - 700
Multi tone scrnA C-patch tgt VL: H-SPD
To display the C-color patch target value of screen A in real-time multiple tone control at high
speed.
Among 10-gradation patch images formed by each dithering method (error diffusion/low screen
ruling/high screen ruling), 5th patch image is the target.
When hue variation occurs and the displayed value is not in the tolerable range, execute the auto
gradation adjustment (reset the target value). Check the Patch Sensor if not corrected.
When hue variation occurs
N/A (Display only)
0 to 1023
0 - 700
755
8. Service Mode