2. Removing the ITB Cleaning
CAUTION:
Do not touch the surface of the ITB. (When you touch the ITB, touch the areas within 10mm from each edge of the belt.)
■ Procedure
1. Turn over the ITB Unit.
2. Remove the Bush Slider [1].
• 1 E-ring [2]
3. Pull the ITB Pressure Release Lever [1] toward the front.
4. Free the harness [2].
• 3 Wire Saddles [3]
• 1 Edge Saddle [4]
Unit"Removing the ITB Cleaning Unit" on page 290
[2]
[1]
4x
[3]
296
4. Disassembly/Assembly
[4]
[2]
[1]