Canon imageRUNNER ADVANCE C5500 Series Service Manual page 878

COPIER > ADJUST > MISC
SEG-ADJ3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
K-ADJ3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-ADJ3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-EN3 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-CNT3 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set criteria for text/photo: back side
To set the judgment level of text/photo original in Text/Photo/Map mode when reading the back
side.
As the value is larger, the original is more likely judged as a photo document, and as the value is
smaller, the original is more likely judged as a text document.
When adjusting the classification level of text and photo in Text/Photo/Map mode on the back side
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-4 to 4
0
Set Bk text jdgmt stdrd: back side
To set the judgment level of black characters at text processing (back side at duplex reading with
1 path).
As the value is increased, the text tends to be detected as black.
When preferring the text to be judged as black (back side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
Set ACS B&W/color jdgmt stdrd:back side
To set the judgment level of B&W/color original in ACS mode (back side at duplex reading with 1
path).
As the value is increased, the original tends to be detected as a B&W document, and as the value
is decreased, the original tends to be detected as a color document.
When adjusting the color detection level in ACS mode (back side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
Set of ACS mode jdgmt area: back side
To set the judgment area in ACS mode (back side at duplex reading with 1 path).
As the greater value is set, the judgment area is widened.
When adjusting the judgment area in ACS mode (back side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
1
ACS mode jdgmt pixel count area: back
To set the area which counts the pixel to judge the color presence in ACS mode (back side at
duplex reading with 1 path).
As the greater value is set, the judgment area is widen.
When adjusting the area which counts the pixel to judge the color presence in ACS mode (back
side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
0
864
8. Service Mode