Hard Disk - Canon imageRUNNER ADVANCE C5500 Series Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE C5500 Series:

Table of Contents

2. While pressing the Reset button [A] on the Control Panel and the button [B] to reduce brightness of the LCD, turn

ON the power of the host machine and keep both the buttons [A] and [B] pressed.

3. You will hear a normal termination tone from the Control Panel a few seconds later.

When turning ON the power while touching the Touch Panel or releasing your fingers off from the Reset button and the

button to reduce brightness of the LCD before the end tone, turn OFF the power and perform the work again.

4. Release your fingers off from the Reset button [A] on the Control Panel and the button [B] to reduce brightness of

Hard disk

How to Replace the

Parts:"Removing the HDD" on page 252

■ Before Replacing

1. Back up the necessary data based on the table shown below.

2. Printing the set/registered data

• COPIER > FUNCTION > MISC-P > USER-PRT

• COPIER > FUNCTION > MISC-P > P-PRINT

In case the backup fails, print it out or export it to a USB.

Backup target data

Address List

Forwarding Settings

Settings / Registration

Preferences (Except for Paper Type Management Settings)

Adjustment/Maintenance(*)

Function Settings (Except for Printer Custom Settings,Forwarding Set-

Set Destination (Except for Address List)

Management Settings (Except for Address List)

User authentication information used for local device authentication of UA

(User Authentication)

(excluding DCM)

5. Adjustment

Backup Method