Canon imageRUNNER ADVANCE C5500 Series Service Manual page 939

COPIER > OPTION > DSPLY-SW
VC-HIST 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
MD-PSCL 2
T-LW-BK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Supplement/Memo
Amount of Change per
Unit
T-LW-CL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Supplement/Memo
Amount of Change per
Unit
ON/OFF tiered base pricing log display
To set whether to display the video count logs of the tiered base pricing.
When 1 is set, logs of video count correction value can be displayed on the Check Counter screen.
When explaining the tiered base pricing status to the user
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
COPIER> OPTION> USER> VC-AVE
Video count correction value: Average of the video count values for 3 colors (Y/M/C) or 4 colors
(Y/M/C/Bk). Whether to include Bk-color needs to be set in VC-AVE.
For R&D
Set Bk-clr Tonr Cont level warn thrshld
To set the threshold value for the toner level in the Bk-color Toner Container.
When the toner level becomes below the threshold value while TNR-WARN is 0, a toner level
warning message "Toner is low. Replacement not yet needed." is displayed on the Control Panel.
As the value is incremented by 1, the threshold value is increased by 1%. As the value is larger,
the timing to display the message becomes earlier.
When changing the timing to display the toner level warning message for the user to whom toner
is not delivered automatically
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 40
%
It differs according to the location.
COPIER> OPTION> DSPLY-SW> TNR-WARN
It is not linked with COPIER> OPTION> FNC-SW> T-DLV-BK.
1
Set Y/M/C Tonr Cont level warn thrshld
To set the threshold value for the toner level in the Y/M/C-color Toner Container.
When the toner level becomes below the threshold value while TNR-WARN is 0, a toner level
warning message "Toner is low. Replacement not yet needed." is displayed on the Control Panel.
As the value is incremented by 1, the threshold value is increased by 1%. As the value is larger,
the timing to display the message becomes earlier.
When changing the timing to display the toner level warning message for the user to whom toner
is not delivered automatically
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 40
%
5
COPIER> OPTION> DSPLY-SW> TNR-WARN
It is not linked with COPIER> OPTION> FNC-SW> T-DLV-CL.
1
925
8. Service Mode