Canon imageRUNNER ADVANCE C5500 Series Service Manual page 875

COPIER > ADJUST > FEED-ADJ
EXRV-SPD 1
Amount of Change per
Unit
■ CST-ADJ
COPIER > ADJUST > CST-ADJ
MF-A4R 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
MF-A4 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
MF-MAX 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
For R&D
0.5
Adj of MP Tray A4R paper width
To adjust the width of A4R paper in the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi Tray Unit, register a new value of the service label included in the
package. Write the value in the service label on the host machine.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi Tray Unit
1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
- After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MAX/MIN/A4/A5R together with this item.
0 to 1024
According to the setting at shipment
COPIER> FUNCTION> CST> MF-MAX/MIN
COPIER> ADJUST> CST-ADJ> MF-MAX/MIN/A4/A5R
Adj of MP Tray A4 paper width
To adjust the width of A4 paper in the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi Tray Unit, register a new value of the service label included in the
package. Write the value in the service label on the host machine.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi Tray Unit
1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
- After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MAX/MIN/A4R/A5R together with this item.
0 to 1024
According to the setting at shipment
COPIER> FUNCTION> CST> MF-MAX/MIN
COPIER> ADJUST> CST-ADJ> MF-MAX/MIN/A4R/A5R
Adj of Multi-purpose Tray maximum width
To adjust the maximum width of the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi Tray Unit, register a new value of the service label included in the
package. Write the value in the service label on the host machine.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi Tray Unit
1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
- After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MIN/A4/A4R/A5R together with this item.
0 to 1024
According to the setting at shipment
COPIER> FUNCTION> CST> MF-MAX
COPIER> ADJUST> CST-ADJ> MF-MIN/A4/A4R/A5R
861
8. Service Mode