2. Remove the stopper [1] on the rear side.
• 1 Claw [2]
3. Hold the claws [1] of the Shaft Support Holder on both sides, and remove the Secondary Transfer Roller Unit [2].
• 4 Claws [1]
4. Remove the Secondary Transfer Separation Guide Unit [1].
• 1 Bushing [2]
• 2 Springs [3]
4x
[3]
[3]
[2]
338
1x
[1]
[2]
[1]
[1]
4. Disassembly/Assembly
[2]