Canon imageRUNNER ADVANCE C5500 Series Service Manual page 876

COPIER > ADJUST > CST-ADJ
MF-MIN 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
MF-A5R 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
■ MISC
COPIER > ADJUST > MISC
SEG-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
K-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Adj of Multi-purpose Tray minimum width
To adjust the minimum width of the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi Tray Unit, register a new value of the service label included in the
package. Write the value in the service label on the host machine.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi Tray Unit
1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
- After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MAX/A4/A4R/A5R together with this item.
0 to 1024
According to the setting at shipment
COPIER> FUNCTION> CST> MF-MIN
COPIER> ADJUST> CST-ADJ> MF-MAX/A4/A4R/A5R
Adj of MP Tray A5R paper width
To adjust the width of A5R paper in the Multi-purpose Tray.
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
When replacing the Multi Tray Unit, register a new value of the service label included in the
package. Write the value in the service label on the host machine.
- When replacing the DC Controller PCB/clearing RAM data
- When replacing the Multi Tray Unit
1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power switch.
- After the setting value is changed, write the changed value in the service label.
- Be sure to adjust MF-MAX/MIN/A4/A4R together with this item.
0 to 1024
According to the setting at shipment
COPIER> FUNCTION> CST> MF-MAX/MIN
COPIER> ADJUST> CST-ADJ> MF-MAX/MIN/A4/A4R
Set criteria for text/photo: front side
To set the judgment level of text/photo original in Text/Photo/Map mode.
As the value is larger, the original is more likely judged as a photo document, and as the value is
smaller, the original is more likely judged as a text document.
When adjusting the classification level of text and photo in Text/Photo/Map mode
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-4 to 4
0
Set criteria for black text: front side
To set the judgment level of black characters at text processing.
As the value is increased, the text tends to be detected as black.
When preferring the text to be judged as black
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
862
8. Service Mode