Canon imageRUNNER ADVANCE C5500 Series Service Manual page 534

240-0002-05
Detection Description
Remedy
246-0001-00
Detection Description
Remedy
246-0002-00
Detection Description
Remedy
246-0003-00
Detection Description
Remedy
246-0005-00
Detection Description
Remedy
247-0001-00
Detection Description
Remedy
247-0002-00
Detection Description
Remedy
247-0003-00
Detection Description
Remedy
247-0004-00
Detection Description
Remedy
248-0001-04
Detection Description
Remedy
Controller communication error
A communication error occurred between the Main Controller PCB and the DC Controller PCB.
[Related parts] R1.00
- Harness between the DC Controller PCB (UN1/J100 and J101) and the Riser PCB (J2 and J10)
- Connector between the Main Controller PCB and the Riser PCB
- Riser PCB
- Main Controller PCB
- DC Controller PCB (UN1)
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2
min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
System error
System error
Contact the service company office
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact the service company office
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
EEPROM error
The Main Controller PCB detected reading error of the Reader backup value in the Reader
Controller PCB.
Check/replace the Reader Controller PCB (PCB1).
[Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx.
2 min) and restore the backup data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
520
7. Error/Jam/Alarm