7. Remove the pin [1] on the front side.
NOTE:
Hold the ITB Unit with a hand while removing the pin to lock the pressure.
• 1 Screw [2]
8. Bend the Secondary Transfer Inner Roller Unit [1] at 90 degrees, and secure it with the pin [2] removed in step 7.
9. When removing the ITB [1], insert paper [2] as shown in the figure to prevent it from being damaged by the plate.
1x
[1]
[2]
[1]
298
[2]
[1]
[2]
[2]
4. Disassembly/Assembly