Canon imageRUNNER ADVANCE C5500 Series Service Manual page 943

COPIER > OPTION > NETWORK
NS-PLNWS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-PLN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-LGN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
MEAP-PN 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Limit plaintext auth at SMTP auth encry
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is encrypted.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
Limit plaintext auth at SMTPauth noencry
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is not encrypted.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
Limit LOGIN authentication at SMTP auth
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of LOGIN authentication at the time of SMTP authentication.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
HTTP port No.setting of MEAP application
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set HTTP port number of MEAP application.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not specify port 8080 when the Print Server is connected. Otherwise, you cannot browse the
device RUI in which MEAP authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side.)
0 to 65535
8000
929
8. Service Mode