Canon imageRUNNER ADVANCE C5500 Series Service Manual page 938

COPIER > OPTION > DSPLY-SW
SDTM-DSP 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
WT-WARN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
UI-PPA 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
CE-DSP 2
LOCAL-SZ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
ON/OFF of auto shutdown shift time dspl
To set whether to display [Auto Shutdown Time] and [Auto Shutdown Weekly Timer] in [Settings/
Registration].
When switching to display or hide the items related to auto shutdown
Enter the setting value, and then press OK key.
When 0 is set, automatic shutdown is not executed.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Timer/Energy Settings> Auto Shutdown Time, Auto Shutdown Weekly Timer
Dspl/hide of Wst Tonr Cntner prep mssg
To set whether to display the preparation warning message of the Waste Toner Container on the
status area of LUI.
When there is no need to notify the preparation timing of the Waste Toner Container to the user
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
ON/OFF of PPA screen display
To set whether to display PPA-related information on the Control Panel or remote UI.
The setting is linked with LGCY-SCP. When LGCY-SCP is set to 0, the setting of this item becomes
1. When LGCY-SCP is set to 1, the setting of this item becomes 0.
When not displaying PPA-related information on the screen
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0 (non PPA-installed machine)/1 (PPA-installed machine)
COPIER> OPTION> USER> LGCY-SCP
PPA (Personal Print Application): A function to hold print job. It contains the function of secured
print.
[Reserve]
ON/OFF area-spec stdrd size ppr set scrn
To set whether to display the area-specific standard size paper on the paper settings screen in
Settings/Registration menu.
When 1 is set, paper type (FOOLSCAP, OFFICIO, etc.) can be set on the paper settings screen
for each paper source.
Upon user's request
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Paper Settings> Paper Settings
924
8. Service Mode