Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1023

COPIER > OPTION > ACC
MIC-TUN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
SRL-SPSW 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
PDL-THR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
CR-TYPE 1
MEAP-SRL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Manual adj of voice recognize microphone
To manually adjust the voice receiving level (sensitivity) of the connected voice recognition
microphone.
Microphone sensitivity is automatically tuned in Settings/Registration menu; however, adjust it
manually as needed.
When the sensitivity of microphone is not improved by auto tuning
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 255
128
Preferences> Accessibility> Voice Navigation Settings> Tune Microphone
Setting of Serial I/F Kit support
To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select "1: Priority on speed".
To correctly stop the output by the upper limit number of sheets, select "2: Priority on upper limit
number of sheets".
At installation of Serial Interface Kit
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
With priority on speed, output cannot be correctly stopped by the upper limit number of sheets.
With priority on the upper limit number of sheets, processing performance of the printer engine is
decreased depending on pickup location.
0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number of sheets
0
ON/OFF PDL print: external charge mode
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to execute normal PDL print when COIN is set to external charge mode 6/7.
When executing normal PDL print in external charge mode
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
COPIER> OPTION> ACC> COIN
[Not used]
Set to allow serial comctn from MEAP app
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow serial communication of MEAP application.
When 1 is set, serial communication of the machine is stopped and only the serial communication
with MEAP application is available.
When performing serial communication from MEAP application
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Prohibited, 1: Allowed
0
1009
8. Service Mode