Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1087

FEEDER > FUNCTION
FEED-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
FAN-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
FAN-ON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
SL-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
SL-ON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
Specify DADF individual feed operation
To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 3
0: 1-sided pickup/delivery operation, 1: Not used, 2: 1-sided pickup/delivery operation (with stamp),
3: Not used
FEEDER> FUNCTION> FEED-ON
Specification of DADF operation fan
To specify the fan of DADF to operate.
The fan is activated by FAN-ON.
At operation check
Enter the setting value, and then press OK key.
0: Cooling Fan (FAN_A1)
FEEDER> FUNCTION> FAN-ON
Operation check of DADF fan
To start operation check of the fan specified by FAN-CHK.
At operation check
1) Select the item, and then press OK key.
It is driven for approximately 5 seconds and is automatically stopped.
2) Press OK key.
The operation check is completed.
Be sure to press the OK key again after execution. The operation automatically stops after
approximately 5 seconds, but is not completed unless the OK key is pressed (STOP is not
displayed).
FEEDER> FUNCTION> FAN-CHK
Specification of DADF operation solenoid
To specify the solenoid of DADF to operate.
The solenoid is activated by SL-ON.
At operation check
Enter the setting value, and then press OK key.
0: Stamp Solenoid (SL1)
FEEDER> FUNCTION> SL-ON
Operation check of DADF solenoid
To start operation check of the solenoid specified by SL-CHK.
At operation check
1) Select the item, and then press OK key.
It is driven for approximately 5 seconds and is automatically stopped.
2) Press OK key.
The operation check is completed.
Be sure to press the OK key again after execution. The operation automatically stops after
approximately 5 seconds, but is not completed unless the OK key is pressed (STOP is not
displayed).
FEEDER> FUNCTION> SL-CHK
1073
8. Service Mode