Canon imageRUNNER ADVANCE C5500 Series Service Manual page 916

COPIER > OPTION > FNC-SW
INTROT-2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
BK-4CSW 2
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
MODELSZ2 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
SVMD-ENT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set auto adj exe intvl at last rotation
To set the number of sheets as the intervals to execute automatic adjustments (D-max control and
real-time multiple tone control) at last rotation.
As the value is changed by 1, the number of sheets is changed by 1 sheet.
As the value is increased, frequency of the automatic adjustments becomes low so productivity is
increased.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
If the value is too large, image failure may occur.
50 to 2000
sheet
1000
1
Set color mode: 1/2 SPD, single Bk mode
To set the color mode of single Bk-color image at 1/2 speed.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Black mode, 1: Color mode
1
Ppr size dtct global support in bookmode
To set whether to enable global support of original size detection at Copyboard reading.
Upon user's request (original consists of mixed media (AB/Inch configuration))
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
The Document Size Sensor (Photo Sensor) is additionally required to correctly detect the
document size when the original consists of mixed media (AB/Inch configuration).
0 to 1
0: Detected with detection size according to location, 1: Detected with AB/Inch mixed media.
0
Setting of entry method to service mode
To set the way to get in service mode to prevent information leak.
As needed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Factory default
1: [Settings/Registration] - Pressing [4] and [9] at the same time - [Settings/Registration]
0
902
8. Service Mode