3. While paying attention not to bend the Protection Sheet [1], lift the sheet using a screwdriver. After that, check that
the sheet that is being lifted is above the pad [2].
4. Apply Tospearl [1] to a whole area [A] shown in the figure below.
CAUTION:
When applying Tospearl, be careful not to scatter it inside the ITB or on the Drive Roller or Secondary Transfer Inner Roller.
If it scatters inside the ITB or on the Drive Roller or Secondary Transfer Inner Roller, wipe it off using lint-free paper
moistened with alcohol while rotating the motor by hand. Be sure to rotate the motor counterclockwise only and be careful
not to turn it clockwise.
CAUTION:
Actions after
Replacement:"Adjustment Procedure" on page 433
Removing the ITB
■ Preparation
1. Removing the ITB
Unit"Removing the ITB Unit" on page 283
[1]
[2]
[1]
[1]
[A]
295
4. Disassembly/Assembly