Canon imageRUNNER ADVANCE C5500 Series Service Manual page 963

COPIER > OPTION > IMG-MCON
IFXEML-Z 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
BMLNKS-Z 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
REDU-CNT 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Set img proc at clr iFAX,mail recv print
To set the image processing which is performed when printing color iFAX or received e-mail.
When there is a request for image improvement
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Equivalent to PDL text mode (Black text is reproduced with 4 colors. Error diffused image. The
hue of the photo area is more vivid than that of 2.)
1: Equivalent to PDL photo mode (Black text is reproduced with 4 colors. Screen processed image.)
2: Equivalent to scanned text mode (Black text is reproduced with a single Bk color. Error diffused
image. The hue of the photo area might be different from that of 0.)
3: Equivalent to scanned photo mode (Black text is reproduced with a single Bk color. Screen
processed image.)
0
Set img proc at BMLinkS reception print
To set the image processing which is performed when printing received BMLinkS.
When there is a request for image improvement
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Equivalent to PDL text mode (Black text is reproduced with 4 colors. Error diffused image. The
hue of the photo area is more vivid than that of 2.)
1: Equivalent to PDL photo mode (Black text is reproduced with 4 colors. Screen processed image.)
2: Equivalent to scanned text mode (Black text is reproduced with a single Bk color. Error diffused
image. The hue of the photo area might be different from that of 0.)
3: Equivalent to scanned photo mode (Black text is reproduced with a single Bk color. Screen
processed image.)
0
BMLinkS (Business Machine Linkage Service): An integrated network OA device interface
Set toner deposit amount limt at clr adj
To set whether to limit the toner deposit amount at color adjustment (color balance, fine adjustment
of density).
When 0 is set, the color adjustment value is reflected to an image precisely, but toner scattering
in the transfer section and fixing section may occur or paper may wind around the Fixing Film.
When setting 1 for IMGC-ADJ, this setting can be also made in [Adjust Toner Volume Used for
Color Printing] in [Settings/Registration].
- Upon user's request
- When reflecting the color adjustment value to an image precisely
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When 1 is set, toner scattering in the transfer section and fixing section may occur or paper may
wind around the Fixing Belt.
0 to 1
0: Toner deposit amount is not limited.
1: Toner deposit amount is limited to the specified amount.
1
COPIER> OPTION> DSPLY-SW> IMGC-ADJ
Adjustment/Maintenance> Adjust Image Quality> Adjust Toner Volume Used for Color Printing
949
8. Service Mode