Canon imageRUNNER ADVANCE C5500 Series Service Manual page 907

COPIER > FUNCTION > MISC-P
ITB-INIT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
RPT-FILE 1
Detail
Use Case
Adj/Set/Operate Method
Supplement/Memo
RPT2USB 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
TNRB-PRT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Initial adj of ITB reference position
To make an initial adjustment of the reference position of the ITB displacement correction control.
The reference position in black mode can be checked by ITB-POS, and it in color mode can be
checked by ITB-POS2.
- At installation
- At replacement of ITB-related parts
Select the item, and then press OK key.
Be sure to execute this item after closing all covers.
During operation: ACTIVE, When operation finished normally: OK!, At abnormal termination: NG
COPIER> DISPLAY> MISC> ITB-POS/POS2
Output of report print file
To save various service reports in HDD as a file.
The files can be obtained using PC to which SST has been installed or USB flash drive after starting
the machine in download mode.
When obtaining the service report as a file instead of printing the report out
Select the item, and then press OK key.
File size: Approx. 1 MB at a maximum
Write serv rpt file to USB flash drive
To store the report file of service mode saved in HDD by RPT-FILE to a USB flash drive.
When storing the report file of service mode to a USB flash drive
Select the item, and then press OK key.
COPIER> FUNCTION> MISC-P> RPT-FILE
Output of Toner Container ID report
To output the ID of the Toner Container in the form of a report.
Text data is saved in HDD as a file (TNRB-PRT-RPT.TXT).
When checking the ID of the Toner Container
Select the item, and then press OK key.
12-digit alphanumeric
COPIER> FUNCTION> MISC-P> RPT-FILE
893
8. Service Mode