Canon imageRUNNER ADVANCE C5500 Series Service Manual page 902

COPIER > FUNCTION > CLEAR
1TR-CLR 2
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
JV-CACHE 1
Detail
Use Case
Adj/Set/Operate Method
LANG-CLR 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
FIN-MCON 1
Detail
Use Case
Adj/Set/Operate Method
Additional Functions
Mode
PLPW-CLR 2
Detail
Use Case
Adj/Set/Operate Method
Clear primary transfer ATVC control log
To clear the primary transfer ATVC control log.
Although primary transfer ATVC control is executed based on the log information, dramatic
changes in the resistance of the Primary Transfer Roller, etc. may prevent an optimum transfer
bias from being set because the control does not work properly.
When the current value (1ATVC-Y/M/C/K4) flowed to the Primary Transfer Roller at ATVC control
is out of the appropriate target value range (50 to 700), the appropriate control can be executed
by clearing the log information.
- When replacing the Primary Transfer Roller
- When the environment (temperature and humidity) changes dramatically
- When an image failure due to the primary transfer occurs
Select the item, and then press OK key.
COPIER> DISPLAY> HV-STS> 1ATVC-Y/M/C/K4
COPIER> FUNCTION> CLEAR> 1TR-CLR
Cache clear of JAVA application
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the cache information used by JAVA application.
When initializing the JAVA application
Select the item, and then press OK key.
Uninstallation of language files
To uninstall the language files other than Japanese and English files installed in HDD.
When installing a new language file while the maximum number of language files (11 files) have
been already installed, an existing language file needs to be uninstalled.
When deleting/switching language files
1) Select the item, and then press OK key.
2) Download the firmware in which the necessary language files are included using SST or a USB
flash drive.
A language file is not uninstalled unless the downloaded language files are installed by SST or a
USB flash drive after the execution of this item. If installation is not executed, uninstallation will be
canceled. (Status of the machine remains the same as it was before execution.)
- After the execution, language displayed on the screen becomes English. Switch the language as
needed.
- There are 9 language files (JEFIGSCKT) installed at the time of shipment.
Initial delvry dest info in controller
To initialize the delivery destination information which is stored in the Main Controller.
The information needs to be cleared when the delivery destination is changed due to change in
configuration of delivery options; otherwise, malfunction occurs.
After execution, set the delivery destination again in [Output Tray Settings] in [Settings/
Registration].
When changing the configuration of delivery options
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Function Settings> Common> Paper Output Settings> Output Tray Settings
Clear security policy setting password
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the password of the security administrator set in the security policy settings.
When clearing the password of the security administrator
Select the item, and then press OK key.
888
8. Service Mode