■ Procedure
1. Move the guide [1] with the harness attached so that it does not disturb the work.
• 4 Connectors [2]
• 4 Claws [3]
NOTE:
• To remove the Developing High-Voltage PCB (YMC), perform step 2.
• To remove the Charging High-Voltage PCB (YMC), perform step 3.
2. Remove the Developing High-Voltage PCB (YMC) [1].
• 1 Connector [2]
• 2 Screws [3]
• 2 Hooks [4]
4x
4x
[3]
1x
2x
[2]
276
[3]
[1]
[2]
[2]
[4]
[1]
[3]
4. Disassembly/Assembly