Canon imageRUNNER ADVANCE C5500 Series Service Manual page 944

COPIER > OPTION > NETWORK
CHNG-STS 2
CHNG-CMD 2
MEAP-SSL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
LPD-PORT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
WUEV-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
WUEV-INT 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Amount of Change per
Unit
[Not used]
[Not used]
HTTPS port setting of MEAP
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the port of HTTPS server in the case of using SSL with HTTP of MEAP.
When specifying the setting of HTTPS port for MEAP
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 65535
8443
Setting of LPD port number
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the LPD port number.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 65535
515
LPD port: Network port for TCP/IP communication when making prints through network.
Setting of sleep notification execution
To set whether to notify the sleep mode to the application (imageWARE, etc) on the network when
shifting to/recovering from the sleep mode.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Notified, 1: Not notified
0
Setting of sleep notification interval
To set the interval of sleep notification.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This is active when COPIER> OPTION> NETWORK> WUEV-SW is set to 0: Notified.
60 to 65535
sec
600
COPIER> OPTION> NETWORK> WUEV-SW
1
930
8. Service Mode