Cleaning The Registration Patch Sensor - Canon imageRUNNER ADVANCE C5500 Series Service Manual

5. Hold the ITB Unit [1] as shown in the figure and remove it in the direction of the arrow. Put the ITB Unit on paper to
prevent scattering of toner from the ITB Cleaning Unit.
CAUTION:
• When the ITB Unit is removed even if it is not replaced, execute COPIER > FUNCTION > MISC-P > ITB-INIT.
• Be careful not to make mistakes when installing the ITB Unit since there is no compatibility with the existing products
(iR-ADV C52XX/iR-ADV C50XX).
• When installing the ITB Unit [1], be sure to align it with the 2 ends of the rails [2].
CAUTION:
Actions after Replacement:"Adjustment Procedure" on page 433

Cleaning the Registration Patch Sensor

■ Preparation
1. Removing the ITB Unit"Removing the ITB Unit" on page 283
[2]
[1]
[1]
287
4. Disassembly/Assembly