Canon imageRUNNER ADVANCE C5500 Series Service Manual page 748

COPIER > DISPLAY > ACC-STS
SORTER 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
DECK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
CARD 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
RAM 1
Detail
Use Case
Adj/Set/Operate Method
Unit
COINROBO 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
NIB 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
NETWARE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Connect state of Finisher-related option
To display the connection state of Finisher-related options.
When checking the connection of Finisher-related options
N/A (Display only)
Left column (connection state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle
3 to 5: Not Used
Right column (connection state of Finisher-belonged Puncher): 0 to 4
0: No hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
Dspl of Paper Deck connection state
To display the connecting state of the Paper Deck.
When checking the connection between the machine and the Paper Decks
N/A (Display only)
0 to 5
0: Not connected, 1: Connected, 2 to 4: Not used, 5: Multi-purpose Tray only
Dspl of connection state of Card Reader
To display the connecting state of Card Reader.
When checking the connection between the machine and the Card Reader
N/A (Display only)
0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is not available.)
1: Card Reader is not connected, or card is inserted while the Card Reader is connected. (Copy
is available.)
Display of MNCON PCB memory capacity
To display the memory capacity of the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
MB
Dspl of Coin Manager connection state
To display the connecting state of the Coin Manager.
When checking the connection between the machine and the Coin Manager
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
Display of Network PCB connection state
To display the connection state of the Network PCB.
When checking the connection between the machine and the Network PCB
N/A (Display only)
0 to 3
0: Not yet connected, 1: Ethernet PCB connected, 2: Token Ring PCB connected, 3: Ethernet PCB
+ Token Ring PCB connected
Install state dspl of NetWare firmware
To display the installation state of the NetWare firmware.
When checking whether NetWare firmware is installed to the machine
N/A (Display only)
0 to 1
0: Not installed, 1: Installed
734
8. Service Mode