Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1013

COPIER > OPTION > USER
FAXSTREN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SJ-UNMSK 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SJ-CLMSK 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
PRTDP-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set of setting delete aftr fax transmit
To set whether to delete the transmission settings except for the address after transmission from
the "Fax" screen.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Delete, 1: Retain
JP:1, USA:0, EUR:0, AU:0, CN:0, KR:0, TW:0, ASIA:0
ON/OFF secured job masking cancellation
To set whether to mask other people's secured jobs.
When 0 is set, operation of other people's secured jobs is not possible because they are masked.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Masking is canceled and other people's
secured jobs can be operated.
It is enabled at MEAP authentication.
When operating secured jobs in charge mode Type-C
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (Masking enabled), 1: ON (Masking canceled)
0
COPIER> OPTION> ACC> COIN
ON/OFF secured job stop button display
To set whether to display the button to stop a secured job.
When 0 is set, the stop button is displayed.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Since the stop button is not displayed,
the secured job cannot be stopped.
When prohibiting to stop the secured job in charge mode Type-C
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (Display), 1: ON (Hide)
0
COPIER> OPTION> ACC> COIN
Set delivery side for 1-page job:2-sided
To set whether to deliver paper face-up or face-down when printing only 1 page although 2-sided
print is set.
When 0 is set, paper is delivered face-down like 1-sided job. (Paper does not pass through the
Duplex Path.)
When 1 is set, paper is delivered face-up via the Duplex Path. Paper feed distance becomes longer
so productivity is decreased.
When changing the delivery side of 1-page print although 2-sided print is set
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Face-down delivery, 1: Face-up delivery
0
999
8. Service Mode