Canon imageRUNNER ADVANCE C5500 Series Service Manual page 425

3. Fixing alignment adjustment
Pre-secondary transfer guide
adjustment
Registration pressure adjust-
ment
Fixing alignment adjustment
*1: The maximum adjustable value is a reference in case of using paper which paper weight is 81 g/m
for reference, because the amount of change differs depending on the paper types being used and individual variability.
■ Pre-secondary transfer guide adjustment
Adjustment is possible by loosening the screws as shown in the figure below and moving the Pre-secondary Transfer Guide
toward the inside of the machine.
The range which can be adjusted by this adjustment is maximum of approx. 0.7 mm. (Differs according to the paper type)
The right side of image is distorted.
The left side of image is distorted.
• When the right side of image is distorted
Push out the front side.
Applicable image error
Fan-shaped distortion
Distortion on the trailing edge
Distortion on the trailing edge
Symptom
Feed direction
Adjustable maximum value
+/- 0.7 mm *1
+/- 0.3 mm *1
+/- 0.3 mm *1
Push out the front side.
Push out the rear side.
Loosen
411
5. Adjustment
Adjustment order
1
2
3
2
. Above values are only
Operation