Canon imageRUNNER ADVANCE C5500 Series Service Manual page 316

5. Remove the Primary Transfer Roller (Bk) [1].
• 1 Shaft Support (Front) [2]
• 1 Spring [3]
NOTE:
There is no specified direction for the installation of the Primary Transfer Roller.
CAUTION:
• Be sure to wrap it in paper [2] as shown in the figure below to avoid touching the surface of the Primary Transfer Roller
[1].
• Be sure not to touch the surface of the Primary Transfer Roller [1].
• Grease is applied on the shaft [A] of the Primary Transfer Roller. If you have touched the grease, be careful not to put
it to other parts.
CAUTION:
If the springs for the Primary Transfer Rollers of different colors (Bk/C/M/Y) are mixed, refer to the table shown below.
Name
Spring
For Bk
Spring
For CMY
[2]
[3]
[2]
[1]
Configuration
302
4. Disassembly/Assembly
[1]
[A]
Characteristics
Shorter than other springs. The end of
the spring is bent.
Longer than the spring of Bk.
Quanti-
ty
2 pcs
6 pcs