Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1152

NOTE:
When the cassette positions are uneven due to the
hardware adjustment, adjust them by loosening the screw
on both left and right sides.
1x
1x
■ Multi-purpose Tray Left Edge
Margin Adjustment (1st side)
1x
<In Case of Out of Range>
■ Cassette Left Edge Margin
1x
Adjustment (Second side)
1138
1. Execute duplex printing from the Multi-purpose
Tray, and check that the left edge margin for the 1st
side is within 2.5 +/- 1.5mm.
Feeding direction
of paper
2. Change the left edge margin adjustment value for
the 1st side of the Multi-purpose Tray.
As making the following selection: Service Mode
(level1)> COPIER > ADJUST > FEED-ADJ > ADJ-MF
andset 1 value larger, the left edge margin becomes
0.1mm larger.
3. Write the new adjustment value on the service label.
• ADJ-MF
4. Exit from Service Mode.
1. Make 2-sided copies using the Cassette 3 and check
that the left edge margin is 2.5 +/- 2.0 mm.
Feeding direction
of paper
9. Installation
image
image